Showingof 346 item(s)
a replacement part for the large Waterway diverter valve in Arctic Spas hot tubs produced before 2009. This internal assembly, often called the "stem" or "gate," is the component inside the valve that directs the water flow.
$--.--
replacement part for the large water diverter valves on Arctic Spas hot tubs, specifically for models produced in 2009 and later. It is a two-tone (clear and black) handle shaped like a "bear claw" that fits onto the top of the diverter valve.
$--.--
a pulsating jet that provides a circular massage. This jet was used in Arctic Spas from 2002 to 2006.
$--.--
a 3-inch face with a single, pulsating nozzle and screws into the jet body. This jet was often used in Arctic Spas models from around 2004 onwards.
$--.--
a 2.5-inch face with a directional nozzle that allows for precise water flow control. It uses a threaded design for screw-in installation.
$--.--
A large, threaded handle used to control the water diverter valve in the 2020+ Arctic Spas Custom Models. It is a replacement part for spas equipped with the "Ripple" style valve.
$--.--
Custom Models 2020-Current
A single-pulse jet, designed to provide a circular, rotating massage for the upper back, shoulders, and neck. This is a screw-in replacement jet. For older models with a "snap-in" style jet, a threaded adapter is required.
A single-pulse jet, designed to provide a circular, rotating massage for the upper back, shoulders, and neck. This is a screw-in replacement jet. For older models with a "snap-in" style jet, a threaded adapter is required.
$--.--
Requires 5" clear nut (JET-117146)
Can replace JET-117315
for mounting the large, 7-inch "Monster" jet internals. This "low profile" version is designed to require less space behind the hot tub shell compared to a standard jet body.
Can replace JET-117315
for mounting the large, 7-inch "Monster" jet internals. This "low profile" version is designed to require less space behind the hot tub shell compared to a standard jet body.
$--.--
Arctic Spa Epic Series for Swim Spas (5 pumps) Pre-2020
The overlay clearly labels the specific functions for the 5-pump Epic Series, which includes Pump 1, Pump 2, Pump 3, Pump 4, Pump 5 (Settings), Light, and Up/Down arrows.
The overlay clearly labels the specific functions for the 5-pump Epic Series, which includes Pump 1, Pump 2, Pump 3, Pump 4, Pump 5 (Settings), Light, and Up/Down arrows.
$--.--
The overlay is specifically for the 8-button TSC-80 topside control pad (also known as a keypad) on Arctic Spas with the Global Eco Pak and three pumps.
$--.--
Used on the Gecko in.k506 topside control panel for Arctic Spas, particularly the 2020 and later Classic and Core Series models. This is a peel-and-stick replacement for a worn or damaged overlay and displays the specific button layout for these spas.
$--.--
1995-1996
Arctic/Coyote Models
designed to protect electrical accessories from damage caused by power surges. The specific accessories protected by this fuse can include lights, stereos, ozone generators, or circulation pumps.
Arctic/Coyote Models
designed to protect electrical accessories from damage caused by power surges. The specific accessories protected by this fuse can include lights, stereos, ozone generators, or circulation pumps.
$--.--
1998-2001
Labels the buttons on the topside control panel with the correct spa functions, such as Pump 1, Pump 2, Light, and Temp Up/Down.
Labels the buttons on the topside control panel with the correct spa functions, such as Pump 1, Pump 2, Light, and Temp Up/Down.
$--.--
designed to provide a dual pulsating massage with a stainless steel finish and a threaded screw-in design. If you are replacing an older "snap-in" style jet, you will need to purchase a threaded adaptor ring separately.
$--.--
a complete, two-piece unit featuring a black "bear claw" handle and a clear, threaded cap. The valve is used to adjust the air mixture in the hot tub jets or control the flow for neck jets or water features.
$--.--
This kit allows you to replace the old housing with a more durable 5-inch assembly without having to replace the entire fixture.
$--.--
1994-1999
Adjusts the amount of air mixed with the water from the jets to increase or decrease the intensity of the massage.
Adjusts the amount of air mixed with the water from the jets to increase or decrease the intensity of the massage.
$--.--
an adhesive decal used on specific Arctic Spas models from 2007 through 2019. It is a peel-and-stick replacement for a worn or damaged original overlay. The overlay features the Arctic Spas' specific button layout for the TSC-8 topside control panel.
$--.--
1999-2008
The overlay has 8 buttons labeled with the specific functions for compatible Arctic Spas. The layout is typically:
Top row: Pump 1, Pump 2, Air, Light.
Bottom row: Pump 3, Mode, Up, Down.
The overlay has 8 buttons labeled with the specific functions for compatible Arctic Spas. The layout is typically:
Top row: Pump 1, Pump 2, Air, Light.
Bottom row: Pump 3, Mode, Up, Down.
$--.--
2001-2006
Arctic / Wood Coyote Models
This specific bulb is designed for Arctic Spas hot tubs that use a compatible 12V wedge-base socket.
Arctic / Wood Coyote Models
This specific bulb is designed for Arctic Spas hot tubs that use a compatible 12V wedge-base socket.
$--.--