Showingof 30 item(s)
a 5-inch face with a single, pulsating nozzle and screws into the jet body. The jet typically has a two-tone black and grey design and is for models that use the threaded jet system
$--.--
features a 3-inch directional nozzle with a stainless steel trim and a screw-in style back.
$--.--
a high-volume, pulsating jet with a two-tone face that provides a strong, circular massage. The internal part is what controls the water flow and creates the pulsating effect.
$--.--
a 5-inch face with a single, pulsating nozzle and screws into the jet body. The jet typically has a two-tone black and grey design and is for models that use the threaded jet system.
$--.--
The jet is specifically designed to provide a deep massage to the neck, upper back, and shoulders. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Designed for powerful hydrotherapy in the largest jet locations within the spa. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Requires 5" clear nut (JET-117146)
Can replace JET-117315
for mounting the large, 7-inch "Monster" jet internals. This "low profile" version is designed to require less space behind the hot tub shell compared to a standard jet body.
Can replace JET-117315
for mounting the large, 7-inch "Monster" jet internals. This "low profile" version is designed to require less space behind the hot tub shell compared to a standard jet body.
$--.--
used to convert older "snap-in" style 3-inch jet bodies to accept the newer "threaded" style 3-inch jets. Once installed, the new threaded jets simply screw into the ring, securing them in place.
$--.--
This nut is used with both 5-inch and 7-inch low-profile jet bodies (JET-113022 and JET-113032).
$--.--
a 7-inch "Monster" size jet internal, designed for powerful, targeted hydrotherapy. The jet features a black housing with a stainless steel faceplate
$--.--
a 5-inch screw-in jet with a single, rotating nozzle and a stainless steel faceplate. This jet is threaded and designed to be screwed into a compatible 5-inch jet body. For older, "snap-in" style jets, a separate threaded insert ring is required.
$--.--
designed to provide a dual pulsating massage with a stainless steel finish and a threaded screw-in design. If you are replacing an older "snap-in" style jet, you will need to purchase a threaded adaptor ring separately.
$--.--
features a single, rotating nozzle to provide a massaging action and has a titanium finish for superior durability. As a screw-in model, it is designed for easy replacement.
$--.--
a pulsating jet that provides a circular massage. This jet was used in Arctic Spas from 2002 to 2006.
$--.--
It is a pulsating jet with a 5-inch face that was used in Arctic Spas from 2002 to 2006.
$--.--
A clear, circular nut that secures the jet body to the acrylic shell of the hot tub.
$--.--
2020-Current
Requires (JET-117123) - Replaces JET-117121
Used for installing 3-inch threaded jets. This low-profile design minimizes the intrusion of the jet body into the spa's plumbing area behind the shell.
Requires (JET-117123) - Replaces JET-117121
Used for installing 3-inch threaded jets. This low-profile design minimizes the intrusion of the jet body into the spa's plumbing area behind the shell.
$--.--
Custom Models 2020-Current
Requires Jet Nut (JET-117146)
Replaces JET-117145 for 2009-2019 models
Used for installing 5-inch threaded jets. It features a low-profile design that minimizes the jet body's projection behind the spa's shell.
Requires Jet Nut (JET-117146)
Replaces JET-117145 for 2009-2019 models
Used for installing 5-inch threaded jets. It features a low-profile design that minimizes the jet body's projection behind the spa's shell.
$--.--
Pre 2020 Product
Can be replaced with JET-113045
used to convert older "snap-in" style 5-inch jet housings to accept the newer "threaded" style 5-inch jet internals. This is an adapter ring.
Can be replaced with JET-113045
used to convert older "snap-in" style 5-inch jet housings to accept the newer "threaded" style 5-inch jet internals. This is an adapter ring.
$--.--
designed to provide a dynamic, alternating massage with dual pulsating jets. As a screw-in model, it requires a compatible 5-inch threaded jet body. If replacing an older "snap-in" style jet, a threaded adapter is necessary.
$--.--
The jet provides a single, targeted stream of water for deep-tissue massage. The direction of the flow can be adjusted. This jet is designed to screw into a compatible 5" threaded jet body. If replacing older snap-in style jets, a threaded insert ring is
$--.--