Showingof 44 item(s)
Jet - Turbo - 3" - Single Pulse - Screw In (2-Tone)
$--.--
![Jet - Pepperleaf - 4" - Single Pulse (Stainless Steel) [Core Series]](https://cdn.shoplightspeed.com/shops/644603/files/31410690/230x200x1/jet-pepperleaf-4-single-pulse-stainless-steel-core.jpg "Jet - Pepperleaf - 4\" - Single Pulse (Stainless Steel) [Core Series]")
a 4-inch face with a single, rotating nozzle for a pulsating massage and a corrosion-resistant stainless steel finish.
$--.--
![Jet - Pepperleaf - 2.5" - Directional (2-Tone) [Core Series]](https://cdn.shoplightspeed.com/shops/644603/files/53610571/230x200x1/jet-pepperleaf-25-directional-2-tone-core-series.jpg "Jet - Pepperleaf - 2.5\" - Directional (2-Tone) [Core Series]")
a 2.5-inch face with a directional nozzle that allows for precise water flow control. It uses a threaded design for screw-in installation.
$--.--
![Jet - Pepperleaf - 2.5" - Directional (Stainless Steel) [Core Series]](https://cdn.shoplightspeed.com/shops/644603/files/53414217/230x200x1/jet-pepperleaf-25-directional-stainless-steel-core.jpg "Jet - Pepperleaf - 2.5\" - Directional (Stainless Steel) [Core Series]")
Jet - Pepperleaf - 2.5" - Directional (Stainless Steel) [Core Series]
$--.--
![Jet - Pepperleaf - 4" - Single Pulse (2-Tone) [Core Series]](https://cdn.shoplightspeed.com/shops/644603/files/53609424/230x200x1/jet-pepperleaf-4-single-pulse-2-tone-core-series.jpg "Jet - Pepperleaf - 4\" - Single Pulse (2-Tone) [Core Series]")
a replacement hot tub jet used in Arctic Spas Core models
$--.--
The jet is specifically designed to provide a deep massage to the neck, upper back, and shoulders. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Its threaded installation allows for easy replacement in compatible Arctic Spas models. The face of the jet can be twisted to adjust the water flow or to turn it off completely. This is a screw-in replacement jet. For older Arctic Spas with snap-in jets,
$--.--
Designed for powerful hydrotherapy in the largest jet locations within the spa. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Custom Models 2020-Current
Requires Jet Nut (JET-117146)
Replaces JET-117145 for 2009-2019 models
Used for installing 5-inch threaded jets. It features a low-profile design that minimizes the jet body's projection behind the spa's shell.
Requires Jet Nut (JET-117146)
Replaces JET-117145 for 2009-2019 models
Used for installing 5-inch threaded jets. It features a low-profile design that minimizes the jet body's projection behind the spa's shell.
$--.--
used to convert older "snap-in" style 3-inch jet bodies to accept the newer "threaded" style 3-inch jets. Once installed, the new threaded jets simply screw into the ring, securing them in place.
$--.--
The jet provides a single, targeted stream of water for deep-tissue massage. The direction of the flow can be adjusted. This jet is designed to screw into a compatible 5" threaded jet body. If replacing older snap-in style jets, a threaded insert ring is
$--.--
a 5-inch face with a single, rotating nozzle for a pulsating massage. The jet is designed with a threaded, screw-in back for easy replacement and is commonly used in models from 2020 and later.
$--.--
a replacement hydrotherapy jet internal used in large jet locations in certain Arctic Spas hot tubs, particularly the Custom Series from 2020 onward. It is designed to provide a powerful, high-flow massage
$--.--
a pulsating jet that provides a circular massage. This jet was used in Arctic Spas from 2002 to 2006.
$--.--
It features a 3-inch face with a stainless steel trim and a twin pulsating nozzle, providing a dual, circular massage. The jet is designed to screw into the jet body.
$--.--
Jet - Turbo - 3" - Directional - Screw In (Black/Clear)
$--.--
a 5-inch face with a single, pulsating nozzle and screws into the jet body. The jet typically has a two-tone black and grey design and is for models that use the threaded jet system
$--.--
Requires 5" clear nut (JET-117146)
Can replace JET-117315
for mounting the large, 7-inch "Monster" jet internals. This "low profile" version is designed to require less space behind the hot tub shell compared to a standard jet body.
Can replace JET-117315
for mounting the large, 7-inch "Monster" jet internals. This "low profile" version is designed to require less space behind the hot tub shell compared to a standard jet body.
$--.--
designed for Arctic Spas models made between 2002 and 2006. This jet provides a single, rotating pulse massage and features a stainless steel faceplate.
$--.--
a replacement hydrotherapy jet internal used in the "Super Duper Seat" (SDS). It features a 7-inch face and a single, rotating nozzle for a pulsating, high-flow massage. It is specifically used in Custom Series spas from 2020.
$--.--
The ultrasonic disc vibrates at a high frequency to break water into a fine, ethereal mist that cascades over the spa's surface.
$--.--
It is a pulsating jet with a 5-inch face that was used in Arctic Spas from 2002 to 2006.
$--.--
features a 3-inch directional nozzle with a stainless steel trim and a screw-in style back.
$--.--