Custom Series Models 2020-Current
a component for the lighting systems on Arctic Spas hot tubs and All-Weather Pools. It is used with corner strip lighting to properly power and connect the LED strips around the cabinet.
Showingof 349 item(s)
2012-Current
this light is a "master" LED light, meaning it can control other "slave" lights in the same circuit and is designed for the Ultimate Lighting package.
this light is a "master" LED light, meaning it can control other "slave" lights in the same circuit and is designed for the Ultimate Lighting package.
$--.--
2007-2009
This internal valve piece is specifically used in the air, waterfall, and neck jet control assemblies for pre-2009 models. It works in conjunction with the 2-tone bearclaw cap and regulates the flow of air and water to the various features.
This internal valve piece is specifically used in the air, waterfall, and neck jet control assemblies for pre-2009 models. It works in conjunction with the 2-tone bearclaw cap and regulates the flow of air and water to the various features.
$--.--
This clear internal threaded cap screws into the body of the diverter valve, underneath the decorative bearclaw-shaped handle.
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe
Can be replaced with OZZ-300021
Can be replaced with OZZ-300021
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe in models produced in 2020 and later
Replaces OZZ-3000020
Replaces OZZ-3000020
$--.--
1999-2001
Arctic/Coyote Models
a PVC ball valve with 1 1/2-inch socket (slip) connections on both ends, allowing it to be glued into the spa's plumbing to control water flow
Arctic/Coyote Models
a PVC ball valve with 1 1/2-inch socket (slip) connections on both ends, allowing it to be glued into the spa's plumbing to control water flow
$--.--
used to connect two 2-inch components, typically two socket fittings, by acting as a short length of 2-inch pipe.
$--.--
1996-
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) coupling is a standard PVC fitting designed to connect two pieces of 2-inch PVC pipe or flexible hose in a straight line.
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) coupling is a standard PVC fitting designed to connect two pieces of 2-inch PVC pipe or flexible hose in a straight line.
$--.--
2012-Current
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
$--.--
1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
$--.--
1996-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
$--.--
1994-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 90-degree turn in the plumbing.
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 90-degree turn in the plumbing.
$--.--
1994-Current
Arctic/Coyote Models
A "street" elbow has a spigot (SPG) end that glues into a socket fitting and a socket (SLIP) end that glues onto a pipe. This fitting creates a tight 90-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "street" elbow has a spigot (SPG) end that glues into a socket fitting and a socket (SLIP) end that glues onto a pipe. This fitting creates a tight 90-degree turn in the 2-inch diameter plumbing.
$--.--
Used to distribute water from a 1-inch spigot (SPG) connection to four 3/8-inch barbed (BARB) ports that connect to the jet lines. The manifold has a 1-inch spigot (SPG) end, which is the same diameter as 1-inch pipe and glues inside a 1-inch slip (socket
$--.--
used to distribute water from a 2-inch pipe into two branches, each with a 3/4-inch barbed port, for specific jet applications. The manifold has a 2-inch spigot (SPG) connection on one end and a 2-inch socket (SOC) connection on the other
$--.--
a "flow-thru" manifold, meaning it connects two 2-inch components and splits off two smaller 3/4-inch barbed ports for small jet lines or air lines. The "spg" (spigot) connections mean that both 2-inch ends of the manifold are designed to be glued into 2-
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to four 3/4-inch barbed (BARB) ports for jet lines
$--.--
designed to create a watertight seal between the pump and the plumbing, preventing leaks. The "(229)" refer to the o-ring's internal dimensions, ensuring a precise fit.
$--.--
2003-2006
Arctic/Coyote Models
Is specifically used to seal the cap to the valve body. A worn-out or damaged o-ring can cause a slow leak around the air control knob.
Arctic/Coyote Models
Is specifically used to seal the cap to the valve body. A worn-out or damaged o-ring can cause a slow leak around the air control knob.
$--.--
replacement o-ring for the 1 1/2-inch pump unions used on the circulation pumps. The "(225)" indicates a specific size used for sealing the pump's union to the spa's plumbing to prevent leaks.
$--.--
is a replacement seal for the 2-inch heater union fitting. This seal is a "T" gasket creates a watertight seal to prevent leaks.
$--.--
a replacement part for the large Waterway diverter valve in Arctic Spas hot tubs produced before 2009. This internal assembly, often called the "stem" or "gate," is the component inside the valve that directs the water flow.
$--.--