Showingof 354 item(s)
This o-ring is used to seal the cap to the body of the large 2-inch diverter valve found on models produced before 2010. A worn-out o-ring can cause a leak around the handle of the diverter valve.
$--.--
a replacement part for the clear-coloured diverter valves produced from 2010 to the present. This o-ring is used to seal the cap to the valve body and prevent leaks around the handle
$--.--
This small o-ring seals the valve stem to the inside of the white cap on the large water diverter valve. A leak around the diverter handle is a common symptom of a worn or cracked o-ring.
$--.--
a replacement part for the large water diverter valves on Arctic Spas hot tubs produced from 2010 to the present. It is a seal for the internal part of the valve, which helps to stop leaks that can occur around the cap and handle. This o-ring is typically
$--.--
a replacement part for the internal valve stem of the air, waterfall, and neck jet control valves. This particular o-ring, measuring 1 3/8", is for models with the large black and clear "bear paw" style controls, specifically those produced before 2009.
$--.--
a replacement part for the large Waterway diverter valve in Arctic Spas hot tubs produced before 2009. This internal assembly, often called the "stem" or "gate," is the component inside the valve that directs the water flow.
$--.--
replacement part for the large water diverter valves on Arctic Spas hot tubs, specifically for models produced in 2009 and later. It is a two-tone (clear and black) handle shaped like a "bear claw" that fits onto the top of the diverter valve.
$--.--
It is the notched, round, black plastic handle used on the top of certain water diverter valves.
$--.--
features a 3-inch directional nozzle with a stainless steel trim and a screw-in style back.
$--.--
Designed for use with Arctic Spas Custom models from 2020 and later. Controls the air, waterfall, and/or neck jet functions depending on the spa's configuration. The handle features a ripple-style grip for easy turning.
$--.--
A large, threaded handle used to control the water diverter valve in the 2020+ Arctic Spas Custom Models. It is a replacement part for spas equipped with the "Ripple" style valve.
$--.--
Used to connect a heater to the plumbing. This nut comes in two halves that are fastened together with screws around the heater's flange, making it a convenient repair solution for broken or stripped heater unions.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
a replacement headrest used in certain Arctic Spas hot tubs, specifically the Classic and earlier models. The "w/ Mounting Post" indicates that it features a telescoping mounting post system that allows the pillow to be adjusted for height
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
2006
air control valve used in Apollo and Coyote models. It regulates the airflow into the water jets, allowing users to customize the massage intensity. This particular version is specified as grey and clear, and it is a 1-inch valve with a handle diame
air control valve used in Apollo and Coyote models. It regulates the airflow into the water jets, allowing users to customize the massage intensity. This particular version is specified as grey and clear, and it is a 1-inch valve with a handle diame
$--.--
Regulates the airflow into the water jets to control the intensity of the massage. Turning the handle controls the amount of air mixed with the water.
$--.--
2001-2006
Arctic / Coyote Models
It uses a 1-inch slip connection, meaning it is designed to accept a 1-inch pipe or fitting that measures about 1.25 inches outside diameter.
Arctic / Coyote Models
It uses a 1-inch slip connection, meaning it is designed to accept a 1-inch pipe or fitting that measures about 1.25 inches outside diameter.
$--.--
a high-flow, complete suction fitting assembly. It is designed to allow a large volume of water to be drawn by the hot tub pump.
$--.--
designed to provide a dynamic, alternating massage with dual pulsating jets. As a screw-in model, it requires a compatible 5-inch threaded jet body. If replacing an older "snap-in" style jet, a threaded adapter is necessary.
$--.--