Welcome to the Arctic Spas USA Dealer Parts Site - Ships within 24 hours On Business Days
509-466-5542
Showingof 349 item(s)
Show:
Sort By:
This impeller is for pumps with a 1 HP, 1-speed North American Pentair motor used in specific Arctic Spas and Coyote hot tub models.
$--.--
2019-Current
Swim Spas & Summit XL Models only (Pre & Post 2020)
Can replace PAK-112150 Spas Built in 2019 or earlier
monitors water pressure in the heater manifold and protects the heater from damage if there is insufficient water flow.
$--.--
This impeller is for pumps with an AquaFlo/Gecko Flo-Master XP2e wet end.
It is rated for a 3.0 horsepower (HP) motor.
$--.--
This transformer converts the high-voltage power from the spa's electrical system to the low voltage required to power the lights in the Ultimate Lighting system.
$--.--
2010-2019
a complete assembly that includes the large, black and clear bearclaw handle and the clear threaded cap. This valve is used to redirect the flow of water to different jet zones in the spa.
$--.--
a round, two-tone headrest used in select Arctic Spas models, primarily those manufactured between 2006 and 2008. The pillow attaches to the hot tub shell with a single, centered suction cup on the back.
$--.--
a specific component of the Onzen saltwater sanitation system. It is designed to securely hold the replaceable Onzen electrode cartridge. The cartridge must be purchased separately.
$--.--
The ultrasonic disc vibrates at a high frequency to break water into a fine, ethereal mist that cascades over the spa's surface.
$--.--
provides the necessary power to the Onzen generator, which sanitizes the water through electrolysis.
$--.--
This probe works by sending temperature readings to the spa's control pack, allowing it to turn the heater on and off to maintain the water at the set temperature.
$--.--
a consumable electrode cartridge for the Onzen saltwater sanitization system. Designed for the Onzen system, not the newer SpaBoy system, which uses a different cell. The cartridge should be replaced annually to ensure proper sanitizer production.
$--.--
This specific part is designed for the Flo-Master XP2e series of pumps and has a 2-inch threaded intake and discharge. It is intended for use with a 4.0 horsepower, 56-frame, thru-bolt motor and is suitable for either a single-speed or two-speed motor.
$--.--
a 4.0 kW, 240V flow-through heater that is compatible with the Gecko IN.YE series spa packs.
$--.--
a 220V unit, compatible with the 50-60hz electrical systems
$--.--
Arctic Spas Models Pre-2020
Works with Eco Pak North American (PAK-115100)
or
Eco Pak Motherboard North American (PAK-201011)
$--.--
This high-performance pump provides both a low-speed setting for energy-efficient filtration and a high-speed setting for powerful hydrotherapy jets. A 3.0 horsepower, 240V pump with 2-inch connections.
$--.--
a specific audio amplifier used in Arctic Spas hot tubs, particularly in the Wet Tunes™ audio system. This amp allows for wireless music streaming via Bluetooth from a smartphone or other device.
$--.--
2006-Current
Arctic Models
Requires Eco PAK (PAK-115100)
$--.--
Showingof 349 item(s)