Showingof 353 item(s)
designed to take a 2-inch spigot (SPG) connection and split it into two 2-inch spigot connections while also providing a 3/4-inch barbed (BARB) port for the ozone injector.
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to four 3/4-inch barbed (BARB) ports for jet lines
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to six 3/4-inch barbed (BARB) ports for jet lines. The "spg" connections mean that both 2-inch ends are designed to be glued into 2-inch slip (socket) fittings.
$--.--
replacement part for the large water diverter valves on Arctic Spas hot tubs, specifically for models produced in 2009 and later. It is a two-tone (clear and black) handle shaped like a "bear claw" that fits onto the top of the diverter valve.
$--.--
Pepperleaf Jet 2.5" Stainless Steel Directional (Core Series)
$--.--
Pepperleaf Jet 2.5" Stainless Steel Single Pulse (Core Series)
$--.--
a replacement hot tub jet used in Arctic Spas Core models
$--.--
The jet is specifically designed to provide a deep massage to the neck, upper back, and shoulders. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Its threaded installation allows for easy replacement in compatible Arctic Spas models. The face of the jet can be twisted to adjust the water flow or to turn it off completely. This is a screw-in replacement jet. For older Arctic Spas with snap-in jets,
$--.--
Designed for powerful hydrotherapy in the largest jet locations within the spa. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Used to connect a heater to the plumbing. This nut comes in two halves that are fastened together with screws around the heater's flange, making it a convenient repair solution for broken or stripped heater unions.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
a replacement headrest used in certain Arctic Spas hot tubs, specifically the Classic and earlier models. The "w/ Mounting Post" indicates that it features a telescoping mounting post system that allows the pillow to be adjusted for height
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
2001-2006
Arctic / Coyote Models
It uses a 1-inch slip connection, meaning it is designed to accept a 1-inch pipe or fitting that measures about 1.25 inches outside diameter.
Arctic / Coyote Models
It uses a 1-inch slip connection, meaning it is designed to accept a 1-inch pipe or fitting that measures about 1.25 inches outside diameter.
$--.--
designed to provide a dynamic, alternating massage with dual pulsating jets. As a screw-in model, it requires a compatible 5-inch threaded jet body. If replacing an older "snap-in" style jet, a threaded adapter is necessary.
$--.--
a 5-inch screw-in jet with a single, rotating nozzle and a stainless steel faceplate. This jet is threaded and designed to be screwed into a compatible 5-inch jet body. For older, "snap-in" style jets, a separate threaded insert ring is required.
$--.--
designed for Arctic Spas models made between 2002 and 2006. This jet provides a single, rotating pulse massage and features a stainless steel faceplate.
$--.--