Showingof 355 item(s)
A chemical product that lowers the pH and alkalinity of spa and hot tub water
$--.--
This hot tub plumbing flush is a detergent and degreaser used to remove mineral and organic buildup from the internal plumbing just before a water change.
$--.--
2006-
Coyote Models
an external, cabinet-mounted valve that allows the hot tub to be drained for maintenance
Coyote Models
an external, cabinet-mounted valve that allows the hot tub to be drained for maintenance
$--.--
1997-
Arctic/Coyote Models
µF (Capacitance): 35 Microfarad
Voltage: Typically 450V or 370V for pool/hot tub motors
Exact Match Required: Always replace a capacitor with one that has the identical µF and voltage rating to avoid damaging your pump motor
Arctic/Coyote Models
µF (Capacitance): 35 Microfarad
Voltage: Typically 450V or 370V for pool/hot tub motors
Exact Match Required: Always replace a capacitor with one that has the identical µF and voltage rating to avoid damaging your pump motor
$--.--
Pre-2020 Models
used to redirect water to different jets within the spa and comes in a two-tone color
used to redirect water to different jets within the spa and comes in a two-tone color
$--.--
a specific component for the Arctic Spas Spa Boy saltwater sanitation system. This power supply is required to run the Spa Boy generator, which automatically produces sanitizer for the hot tub water
$--.--
1994-2012 Arctic & Coyote Models
The sensor measures the water temperature and sends the information to the spa's control system
The sensor measures the water temperature and sends the information to the spa's control system
$--.--
2010-2019
The cap, in a translucent or clear color, fits over the bearclaw-shaped handle on the spa's air, waterfall, and neck jet control valves.
The cap, in a translucent or clear color, fits over the bearclaw-shaped handle on the spa's air, waterfall, and neck jet control valves.
$--.--
is a component used to vent trapped air from the pump's wet end. It has a 3/8" barbed end for connecting to a hose and a 1/4" MPT (male pipe thread) end for screwing into the pump housing.
$--.--
This clear internal threaded cap screws into the body of the diverter valve, underneath the decorative bearclaw-shaped handle.
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe
Can be replaced with OZZ-300021
Can be replaced with OZZ-300021
$--.--
2000-
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
$--.--
1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 45-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 45-degree turn in the 2-inch diameter plumbing.
$--.--
Used to distribute water from a 1-inch spigot (SPG) connection to four 3/8-inch barbed (BARB) ports that connect to the jet lines. The manifold has a 1-inch spigot (SPG) end, which is the same diameter as 1-inch pipe and glues inside a 1-inch slip (socket
$--.--
a replacement headrest used in certain Arctic Spas hot tubs, specifically the Classic and earlier models. The "w/ Mounting Post" indicates that it features a telescoping mounting post system that allows the pillow to be adjusted for height
$--.--
a pump used in Arctic Spas All-Weather Pools equipped with the Niagara swim system. For use in 60hz electrical systems. This pump is the component that generates the powerful counter-current for resistance swimming.
$--.--
It is typically found on models from 2020 and later, specifically in the Custom Series. The valve is a hydraulic component that allows for the isolation or servicing of the filter without needing to shut down the entire system.
$--.--
The probe monitors the water temperature in the heater manifold. If the temperature exceeds a safe limit, the sensor trips a safety circuit in the control pack, shutting off the heater. A malfunctioning or disconnected probe can cause error codes, such as
$--.--
Arctic Spas SpaBoy Salt Cell Replacement Cartridge Grey 5 Plate
$--.--
