Custom Models 2020-Current
A single-pulse jet, designed to provide a circular, rotating massage for the upper back, shoulders, and neck. This is a screw-in replacement jet. For older models with a "snap-in" style jet, a threaded adapter is required.
Showingof 349 item(s)
A clear, circular nut that secures the jet body to the acrylic shell of the hot tub.
$--.--
Used to connect a heater to the plumbing. This nut comes in two halves that are fastened together with screws around the heater's flange, making it a convenient repair solution for broken or stripped heater unions.
$--.--
2020-Current
Requires (JET-117123) - Replaces JET-117121
Used for installing 3-inch threaded jets. This low-profile design minimizes the intrusion of the jet body into the spa's plumbing area behind the shell.
Requires (JET-117123) - Replaces JET-117121
Used for installing 3-inch threaded jets. This low-profile design minimizes the intrusion of the jet body into the spa's plumbing area behind the shell.
$--.--
Pre 2020 Product
Can be replaced with JET-113045
used to convert older "snap-in" style 5-inch jet housings to accept the newer "threaded" style 5-inch jet internals. This is an adapter ring.
Can be replaced with JET-113045
used to convert older "snap-in" style 5-inch jet housings to accept the newer "threaded" style 5-inch jet internals. This is an adapter ring.
$--.--
a small, inline, non-return valve used to protect the ozonator from water backflow. It has 1/4" barbed fittings to accept 1/4" ozone tubing. A failing or "frozen" check valve is one of the most common causes of ozonator problems
$--.--
![Jet Nut - 5" - Clear - [For 5" & 7" Jet Bodies]](https://cdn.shoplightspeed.com/shops/644603/files/77030604/230x200x1/jet-nut-5-clear-for-5-7-jet-bodies.jpg "Jet Nut - 5\" - Clear - [For 5\" & 7\" Jet Bodies]")
This nut is used with both 5-inch and 7-inch low-profile jet bodies (JET-113022 and JET-113032).
$--.--
2006-Current
a replacement screw used to attach the equipment access doors
a replacement screw used to attach the equipment access doors
$--.--
a replacement headrest used in certain Arctic Spas hot tubs, specifically the Classic and earlier models. The "w/ Mounting Post" indicates that it features a telescoping mounting post system that allows the pillow to be adjusted for height
$--.--
Arctic Spa Epic Series for Swim Spas (5 pumps) Pre-2020
The overlay clearly labels the specific functions for the 5-pump Epic Series, which includes Pump 1, Pump 2, Pump 3, Pump 4, Pump 5 (Settings), Light, and Up/Down arrows.
The overlay clearly labels the specific functions for the 5-pump Epic Series, which includes Pump 1, Pump 2, Pump 3, Pump 4, Pump 5 (Settings), Light, and Up/Down arrows.
$--.--
a replacement light cord used to connect the hot tub light to the Gecko in.ye-5 spa pack. It is designed with a 3-pin connector for a specific terminal on the control board and includes the light bulb socket.
$--.--
Used on the Gecko in.k506 topside control panel for Arctic Spas, particularly the 2020 and later Classic and Core Series models. This is a peel-and-stick replacement for a worn or damaged overlay and displays the specific button layout for these spas.
$--.--
1995-1996
Arctic/Coyote Models
designed to protect electrical accessories from damage caused by power surges. The specific accessories protected by this fuse can include lights, stereos, ozone generators, or circulation pumps.
Arctic/Coyote Models
designed to protect electrical accessories from damage caused by power surges. The specific accessories protected by this fuse can include lights, stereos, ozone generators, or circulation pumps.
$--.--
a 7-inch "Monster" size jet internal, designed for powerful, targeted hydrotherapy. The jet features a black housing with a stainless steel faceplate
$--.--
a replacement cupholder for the 2020 and later Custom Series models with the Ultimate Lighting system. It features a frosted finish and includes the Arctic Spas logo, which illuminates when the spa's lights are on.
$--.--
1998-2001
Labels the buttons on the topside control panel with the correct spa functions, such as Pump 1, Pump 2, Light, and Temp Up/Down.
Labels the buttons on the topside control panel with the correct spa functions, such as Pump 1, Pump 2, Light, and Temp Up/Down.
$--.--
designed to provide a dynamic, alternating massage with dual pulsating jets. As a screw-in model, it requires a compatible 5-inch threaded jet body. If replacing an older "snap-in" style jet, a threaded adapter is necessary.
$--.--
a 5-inch screw-in jet with a single, rotating nozzle and a stainless steel faceplate. This jet is threaded and designed to be screwed into a compatible 5-inch jet body. For older, "snap-in" style jets, a separate threaded insert ring is required.
$--.--
designed to provide a dual pulsating massage with a stainless steel finish and a threaded screw-in design. If you are replacing an older "snap-in" style jet, you will need to purchase a threaded adaptor ring separately.
$--.--
This jet features a 3-1/2" diameter, a black finish, and a 5-scallop textured face. It is a high-flow, directional jet internal designed to deliver a steady, adjustable stream of water for a targeted massage.
$--.--