Showingof 346 item(s)
Used to connect a heater to the plumbing. This nut comes in two halves that are fastened together with screws around the heater's flange, making it a convenient repair solution for broken or stripped heater unions.
$--.--
2020-Current
Requires (JET-117123) - Replaces JET-117121
Used for installing 3-inch threaded jets. This low-profile design minimizes the intrusion of the jet body into the spa's plumbing area behind the shell.
Requires (JET-117123) - Replaces JET-117121
Used for installing 3-inch threaded jets. This low-profile design minimizes the intrusion of the jet body into the spa's plumbing area behind the shell.
$--.--
Custom Models 2020-Current
Requires Jet Nut (JET-117146)
Replaces JET-117145 for 2009-2019 models
Used for installing 5-inch threaded jets. It features a low-profile design that minimizes the jet body's projection behind the spa's shell.
Requires Jet Nut (JET-117146)
Replaces JET-117145 for 2009-2019 models
Used for installing 5-inch threaded jets. It features a low-profile design that minimizes the jet body's projection behind the spa's shell.
$--.--
used to convert older "snap-in" style 3-inch jet bodies to accept the newer "threaded" style 3-inch jets. Once installed, the new threaded jets simply screw into the ring, securing them in place.
$--.--
Pre 2020 Product
Can be replaced with JET-113045
used to convert older "snap-in" style 5-inch jet housings to accept the newer "threaded" style 5-inch jet internals. This is an adapter ring.
Can be replaced with JET-113045
used to convert older "snap-in" style 5-inch jet housings to accept the newer "threaded" style 5-inch jet internals. This is an adapter ring.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
a small, inline, non-return valve used to protect the ozonator from water backflow. It has 1/4" barbed fittings to accept 1/4" ozone tubing. A failing or "frozen" check valve is one of the most common causes of ozonator problems
$--.--
This nut is used with both 5-inch and 7-inch low-profile jet bodies (JET-113022 and JET-113032).
$--.--
2006-Current
a replacement screw used to attach the equipment access doors
a replacement screw used to attach the equipment access doors
$--.--
a replacement headrest used in certain Arctic Spas hot tubs, specifically the Classic and earlier models. The "w/ Mounting Post" indicates that it features a telescoping mounting post system that allows the pillow to be adjusted for height
$--.--
a replacement light cord used to connect the hot tub light to the Gecko in.ye-5 spa pack. It is designed with a 3-pin connector for a specific terminal on the control board and includes the light bulb socket.
$--.--
Keep in mind all Cedar products will be shipped on a pallet to prevent damage. This will result in a higher freight charge.
$--.--
a pump used in Arctic Spas All-Weather Pools equipped with the Niagara swim system. For use in 60hz electrical systems. This pump is the component that generates the powerful counter-current for resistance swimming.
$--.--
a 7-inch "Monster" size jet internal, designed for powerful, targeted hydrotherapy. The jet features a black housing with a stainless steel faceplate
$--.--
Regulates the airflow into the water jets to control the intensity of the massage. Turning the handle controls the amount of air mixed with the water.
$--.--
replacement cupholder for the Classic Series manufactured in 2020 and later. It is designed to work with the lighting system, providing a frosted or clear appearance that illuminates when the hot tub lights are on
$--.--
a replacement cupholder for the 2020 and later Custom Series models with the Ultimate Lighting system. It features a frosted finish and includes the Arctic Spas logo, which illuminates when the spa's lights are on.
$--.--