1996-1998
Arctic/Coyote Models
a replacement gasket for the wet ends of pumps used in Arctic Spas hot tubs. It creates a watertight seal between the wet end and the pump's motor.
Showingof 346 item(s)
is a replacement seal for the 2-inch heater union fitting. This seal is a "T" gasket creates a watertight seal to prevent leaks.
$--.--
This o-ring is used to seal the cap to the body of the large 2-inch diverter valve found on models produced before 2010. A worn-out o-ring can cause a leak around the handle of the diverter valve.
$--.--
a replacement part for specific Arctic Spas hot tubs produced from 2009 onward. This o-ring is used on the stem of the internal valve, sealing the collar to the clear cap of the large water diverter valve.
$--.--
This small o-ring seals the valve stem to the inside of the white cap on the large water diverter valve. A leak around the diverter handle is a common symptom of a worn or cracked o-ring.
$--.--
a replacement part for the large water diverter valves on Arctic Spas hot tubs produced from 2010 to the present. It is a seal for the internal part of the valve, which helps to stop leaks that can occur around the cap and handle. This o-ring is typically
$--.--
a replacement part for the internal valve stem of the air, waterfall, and neck jet control valves. This particular o-ring, measuring 1 3/8", is for models with the large black and clear "bear paw" style controls, specifically those produced before 2009.
$--.--
For the large diverter valves. The internal assembly is the "guts" of the valve, which controls the water flow to different sections of the spa.
$--.--
It is the notched, round, black plastic handle used on the top of certain water diverter valves.
$--.--
2004-2006
a complete assembly that includes the valve body, internal components, cap, and a black, notched, round handle. This valve controls the flow of water to different jet groups.
a complete assembly that includes the valve body, internal components, cap, and a black, notched, round handle. This valve controls the flow of water to different jet groups.
$--.--
It is a pulsating jet with a 5-inch face that was used in Arctic Spas from 2002 to 2006.
$--.--
It features a 3-inch face with a stainless steel trim and a twin pulsating nozzle, providing a dual, circular massage. The jet is designed to screw into the jet body.
$--.--
a high-volume, pulsating jet with a two-tone face that provides a strong, circular massage. The internal part is what controls the water flow and creates the pulsating effect.
$--.--
a 5-inch face with a single, pulsating nozzle and screws into the jet body. The jet typically has a two-tone black and grey design and is for models that use the threaded jet system.
$--.--
a 5-inch face with a single, pulsating nozzle and screws into the jet body. The jet typically has a two-tone black and grey design and is for models that use the threaded jet system
$--.--
a 2.5-inch face with a directional nozzle that allows for precise water flow control. It uses a threaded design for screw-in installation.
$--.--
Pepperleaf Jet 2.5" Stainless Steel Directional (Core Series)
$--.--
Pepperleaf Jet 2.5" Stainless Steel Single Pulse (Core Series)
$--.--
a replacement hot tub jet used in Arctic Spas Core models
$--.--
The jet is specifically designed to provide a deep massage to the neck, upper back, and shoulders. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Its threaded installation allows for easy replacement in compatible Arctic Spas models. The face of the jet can be twisted to adjust the water flow or to turn it off completely. This is a screw-in replacement jet. For older Arctic Spas with snap-in jets,
$--.--
Designed for powerful hydrotherapy in the largest jet locations within the spa. The face of the jet can be twisted to adjust the water flow from strong to gentle, or to turn it off completely.
$--.--
Designed for use with Arctic Spas Custom models from 2020 and later. Controls the air, waterfall, and/or neck jet functions depending on the spa's configuration. The handle features a ripple-style grip for easy turning.
$--.--
A clear, circular nut that secures the jet body to the acrylic shell of the hot tub.
$--.--