1994-Current
Arctic/Coyote Models
A "street" elbow has a spigot (SPG) end that glues into a socket fitting and a socket (SLIP) end that glues onto a pipe. This fitting creates a tight 90-degree turn in the 2-inch diameter plumbing.
Showingof 347 item(s)
2012-Current
All Weather Pools - Wolverine
a 90-degree PVC elbow with socket connections on both ends, designed for the spa's 4-inch plumbing.
All Weather Pools - Wolverine
a 90-degree PVC elbow with socket connections on both ends, designed for the spa's 4-inch plumbing.
$--.--
This union connects the 2-inch buttress-threaded discharge fitting on a Waterway pump to the spa's 2-inch slip (socket) plumbing.
$--.--
The union connects the Speck 21-80/G/30 G series pump to the 4-inch plumbing of your swim spa.
$--.--
It is a complete union package used to connect the large, high-flow Speck pump to the spa's 4-inch plumbing for the Niagra water feature.
$--.--
2003-2007
Arctic Models
This is the replacement circulation pump specifically for spas with the Peak Ozone II system.
Arctic Models
This is the replacement circulation pump specifically for spas with the Peak Ozone II system.
$--.--
Used to distribute water from a 1-inch spigot (SPG) connection to four 3/8-inch barbed (BARB) ports that connect to the jet lines. The manifold has a 1-inch spigot (SPG) end, which is the same diameter as 1-inch pipe and glues inside a 1-inch slip (socket
$--.--
designed to take a 2-inch spigot (SPG) connection and split it into two 2-inch spigot connections while also providing a 3/4-inch barbed (BARB) port for the ozone injector.
$--.--
used to distribute water from a 2-inch pipe into two branches, each with a 3/4-inch barbed port, for specific jet applications. The manifold has a 2-inch spigot (SPG) connection on one end and a 2-inch socket (SOC) connection on the other
$--.--
This flow-thru manifold features a 2-inch spigot (SPG) connection on one end, a 2-inch socket (SOC) connection on the other, and distributes water to four 3/4-inch barbed ports for small jet lines.
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to four 3/4-inch barbed (BARB) ports for jet lines
$--.--
This flow-thru manifold features a 2-inch spigot (SPG) connection on one end, a 2-inch socket (SOC) connection on the other, and distributes water to six 3/4-inch barbed (BARB) ports for jet lines.
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to six 3/4-inch barbed (BARB) ports for jet lines. The "spg" connections mean that both 2-inch ends are designed to be glued into 2-inch slip (socket) fittings.
$--.--
designed to create a watertight seal between the pump and the plumbing, preventing leaks. The "(229)" refer to the o-ring's internal dimensions, ensuring a precise fit.
$--.--
2003-2006
Arctic/Coyote Models
Is specifically used to seal the cap to the valve body. A worn-out or damaged o-ring can cause a slow leak around the air control knob.
Arctic/Coyote Models
Is specifically used to seal the cap to the valve body. A worn-out or damaged o-ring can cause a slow leak around the air control knob.
$--.--
replacement o-ring for the 1 1/2-inch pump unions used on the circulation pumps. The "(225)" indicates a specific size used for sealing the pump's union to the spa's plumbing to prevent leaks.
$--.--
The o-ring creates a watertight seal for the large, 4-inch union on the high-flow Speck pump used for the Niagra water feature.
$--.--
1992-1998
Arctic/Coyote Models
The "L" shape is a specific design for Arctic Spas and helps to prevent leaks on the 2-inch heater union fittings.
Arctic/Coyote Models
The "L" shape is a specific design for Arctic Spas and helps to prevent leaks on the 2-inch heater union fittings.
$--.--
is a replacement seal for the 2-inch heater union fitting. This seal is a "T" gasket creates a watertight seal to prevent leaks.
$--.--
This o-ring is used to seal the cap to the body of the large 2-inch diverter valve found on models produced before 2010. A worn-out o-ring can cause a leak around the handle of the diverter valve.
$--.--
a replacement part for the clear-coloured diverter valves produced from 2010 to the present. This o-ring is used to seal the cap to the valve body and prevent leaks around the handle
$--.--