Showingof 46 item(s)
It is a complete union package used to connect the large, high-flow Speck pump to the spa's 4-inch plumbing for the Niagra water feature.
$--.--
Used to distribute water from a 1-inch spigot (SPG) connection to four 3/8-inch barbed (BARB) ports that connect to the jet lines. The manifold has a 1-inch spigot (SPG) end, which is the same diameter as 1-inch pipe and glues inside a 1-inch slip (socket
$--.--
designed to take a 2-inch spigot (SPG) connection and split it into two 2-inch spigot connections while also providing a 3/4-inch barbed (BARB) port for the ozone injector.
$--.--
used to distribute water from a 2-inch pipe into two branches, each with a 3/4-inch barbed port, for specific jet applications. The manifold has a 2-inch spigot (SPG) connection on one end and a 2-inch socket (SOC) connection on the other
$--.--
This flow-thru manifold features a 2-inch spigot (SPG) connection on one end, a 2-inch socket (SOC) connection on the other, and distributes water to four 3/4-inch barbed ports for small jet lines.
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to four 3/4-inch barbed (BARB) ports for jet lines
$--.--
This flow-thru manifold features a 2-inch spigot (SPG) connection on one end, a 2-inch socket (SOC) connection on the other, and distributes water to six 3/4-inch barbed (BARB) ports for jet lines.
$--.--
2020-Current
This plug is designed to be used when you are draining your spa to protect the delicate Spa Boy sensor probe from drying out. Replaces OZZ-300030
This plug is designed to be used when you are draining your spa to protect the delicate Spa Boy sensor probe from drying out. Replaces OZZ-300030
$--.--
a replacement drain valve assembly used in various Arctic Spas hot tub models, particularly in the Apollo, Coyote, and some Arctic Flex series. It features a specific thread that accepts a garden hose to drain the water from the spa.
$--.--
an internal, spring-loaded replacement component for the filter canister. It is designed to divert water away from the filter element when the filter becomes clogged, preventing excessive pressure buildup and protecting the pump.
$--.--
is a component used to vent trapped air from the pump's wet end. It has a 3/8" barbed end for connecting to a hose and a 1/4" MPT (male pipe thread) end for screwing into the pump housing.
$--.--
2000-
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
$--.--
used to connect two 2-inch components, typically two socket fittings, by acting as a short length of 2-inch pipe.
$--.--
2012-Current
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
$--.--
1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
$--.--
1996-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
$--.--
a "flow-thru" manifold, meaning it connects two 2-inch components and splits off two smaller 3/4-inch barbed ports for small jet lines or air lines. The "spg" (spigot) connections mean that both 2-inch ends of the manifold are designed to be glued into 2-
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to six 3/4-inch barbed (BARB) ports for jet lines. The "spg" connections mean that both 2-inch ends are designed to be glued into 2-inch slip (socket) fittings.
$--.--
This wall fitting is used to create a durable, threaded connection point in the hot tub's shell for return lines or other plumbing components.
$--.--
This wall fitting is used to create a durable, threaded connection point in the hot tub's shell for return lines or other plumbing components.
$--.--
Used as a shut-off valve to isolate different sections of the hot tub's plumbing. This allows for maintenance or repair of components like pumps or heaters without fully draining the tub.
$--.--