All Arctic & Coyote Models 2011-2019
Arctic Spas Classic & Core Models 2020-Current
Showingof 354 item(s)
used to connect two 2-inch components, typically two socket fittings, by acting as a short length of 2-inch pipe.
$--.--
replacement floating weir and lock ring kit for Arctic Spas hot tubs. It is specifically designed for models manufactured between 2002 and 2008 and is used in the filter skimmer assembly.
$--.--
Arctic Spas Models Pre-2020
Works with Eco Pak North American (PAK-115100)
or
Eco Pak Motherboard North American (PAK-201011)
Works with Eco Pak North American (PAK-115100)
or
Eco Pak Motherboard North American (PAK-201011)
$--.--
A specialized filter for 2020 and newer Custom Series Arctic Spas, designed as an upgrade to the standard Progressive Filters, offering enhanced filtration with its combination of pleated and solid filter.
$--.--
Reduces or eliminates excess chlorine or bromine in water
$--.--
A chemical product that lowers the pH and alkalinity of spa and hot tub water
$--.--
An acrylic polish used to clean and restore the shine to the interior of spas and hot tubs.
$--.--
replacement o-ring for the 1 1/2-inch pump unions used on the circulation pumps. The "(225)" indicates a specific size used for sealing the pump's union to the spa's plumbing to prevent leaks.
$--.--
1996-1998
Arctic/Coyote Models
a replacement gasket for the wet ends of pumps used in Arctic Spas hot tubs. It creates a watertight seal between the wet end and the pump's motor.
Arctic/Coyote Models
a replacement gasket for the wet ends of pumps used in Arctic Spas hot tubs. It creates a watertight seal between the wet end and the pump's motor.
$--.--
It is typically found on models from 2020 and later, specifically in the Custom Series. The valve is a hydraulic component that allows for the isolation or servicing of the filter without needing to shut down the entire system.
$--.--
Arctic Smart PH Refill Canister300gm 2 pack USD
$--.--
This conditioner is designed to increase the effectiveness of spa chemicals, clarify water, protect metal surfaces from corrosion, and provide a softer bathing experience for users.
$--.--
1997-
Arctic/Coyote Models
µF (Capacitance): 35 Microfarad
Voltage: Typically 450V or 370V for pool/hot tub motors
Exact Match Required: Always replace a capacitor with one that has the identical µF and voltage rating to avoid damaging your pump motor
Arctic/Coyote Models
µF (Capacitance): 35 Microfarad
Voltage: Typically 450V or 370V for pool/hot tub motors
Exact Match Required: Always replace a capacitor with one that has the identical µF and voltage rating to avoid damaging your pump motor
$--.--
2009-2019 Arctic/Coyote Models
Is replaceable with JET-113032 and requires 5" clear nut (JET-117146)
Is replaceable with JET-113032 and requires 5" clear nut (JET-117146)
$--.--
2011-2019 Arctic/Coyote Models
2020-Current Arctic Classic & Core Models
A black plastic nut used to secure the filter bucket in an Arctic Spa
2020-Current Arctic Classic & Core Models
A black plastic nut used to secure the filter bucket in an Arctic Spa
$--.--
2010-
Apollo Models
2-inch female slip connection on both ends, used to control water flow in a hot tub's PVC plumbing
Apollo Models
2-inch female slip connection on both ends, used to control water flow in a hot tub's PVC plumbing
$--.--
1994-
The "2"SPG" (2-inch Spigot) describes the fitting type, indicating that it connects a 2-inch heater to the hot tub's PVC plumbing
The "2"SPG" (2-inch Spigot) describes the fitting type, indicating that it connects a 2-inch heater to the hot tub's PVC plumbing
$--.--
This adapter is part of the fitness and tether kit that allows users to attach rowing arms to their swim spa for exercise.
$--.--
features a handle on the top and a threaded bottom that screws into the spa's filter housing.
$--.--
2010-2019
The cap, in a translucent or clear color, fits over the bearclaw-shaped handle on the spa's air, waterfall, and neck jet control valves.
The cap, in a translucent or clear color, fits over the bearclaw-shaped handle on the spa's air, waterfall, and neck jet control valves.
$--.--
2007-2009
This internal valve piece is specifically used in the air, waterfall, and neck jet control assemblies for pre-2009 models. It works in conjunction with the 2-tone bearclaw cap and regulates the flow of air and water to the various features.
This internal valve piece is specifically used in the air, waterfall, and neck jet control assemblies for pre-2009 models. It works in conjunction with the 2-tone bearclaw cap and regulates the flow of air and water to the various features.
$--.--