Couplers, Ball Valves, Plugs etc

is a component used to vent trapped air from the pump's wet end. It has a 3/8" barbed end for connecting to a hose and a 1/4" MPT (male pipe thread) end for screwing into the pump housing.

2000-
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.

used to connect two 2-inch components, typically two socket fittings, by acting as a short length of 2-inch pipe.

2012-Current
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.

1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.

1996-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing

This wall fitting is used to create a durable, threaded connection point in the hot tub's shell for return lines or other plumbing components.

This wall fitting is used to create a durable, threaded connection point in the hot tub's shell for return lines or other plumbing components.

Used as a shut-off valve to isolate different sections of the hot tub's plumbing. This allows for maintenance or repair of components like pumps or heaters without fully draining the tub.