Showingof 33 item(s)
is a component used to vent trapped air from the pump's wet end. It has a 3/8" barbed end for connecting to a hose and a 1/4" MPT (male pipe thread) end for screwing into the pump housing.
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe
Can be replaced with OZZ-300021
Can be replaced with OZZ-300021
$--.--
2000-
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
$--.--
1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 45-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 45-degree turn in the 2-inch diameter plumbing.
$--.--
a threaded grate used to cover the ozone or Spa Boy sensor housing on certain models.
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe in models produced in 2020 and later
Replaces OZZ-3000020
Replaces OZZ-3000020
$--.--
1999-2001
Arctic/Coyote Models
a PVC ball valve with 1 1/2-inch socket (slip) connections on both ends, allowing it to be glued into the spa's plumbing to control water flow
Arctic/Coyote Models
a PVC ball valve with 1 1/2-inch socket (slip) connections on both ends, allowing it to be glued into the spa's plumbing to control water flow
$--.--
to cap a 2-inch plumbing connection. A "spigot" plug is designed to be glued into a 2-inch slip socket fitting to permanently or temporarily seal it off.
$--.--
This plug is designed to be used when you are draining your spa to protect the delicate Spa Boy sensor probe from drying out.
$--.--
The plug is used to protect the Onzen/Spa Boy probe when the spa is drained. It screws into the filter bucket housing and keeps the probe wet to prevent it from drying out
$--.--
used to connect two 2-inch components, typically two socket fittings, by acting as a short length of 2-inch pipe.
$--.--
1994-
Arctic/Coyote Models
a slip-by-slip coupling that connects two pieces of 3/4-inch PVC pipe.
Arctic/Coyote Models
a slip-by-slip coupling that connects two pieces of 3/4-inch PVC pipe.
$--.--
1994-
Arctic/Coyote Models
This white PVC coupling connects two pieces of flexible 3/4-inch inside-diameter hose using a smooth barbed connection on both ends.
Arctic/Coyote Models
This white PVC coupling connects two pieces of flexible 3/4-inch inside-diameter hose using a smooth barbed connection on both ends.
$--.--
1996-
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) coupling is a standard PVC fitting designed to connect two pieces of 2-inch PVC pipe or flexible hose in a straight line.
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) coupling is a standard PVC fitting designed to connect two pieces of 2-inch PVC pipe or flexible hose in a straight line.
$--.--
1994-
Arctic/Coyote Models
This coupling is used to connect two pieces of flexible 3/8-inch inside-diameter hose using a smooth barbed connection on both ends.
Arctic/Coyote Models
This coupling is used to connect two pieces of flexible 3/8-inch inside-diameter hose using a smooth barbed connection on both ends.
$--.--
This nipple is a short length of 1 1/2-inch PVC pipe with a spigot (SPG) connection, allowing it to be glued into a socket fitting.
$--.--
2012-Current
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
$--.--
2012-Current
All Weather Pools - Wolverine
a 4-inch PVC Tee designed specifically for the high-flow Niagra water feature. This fitting diverts the flow of water, often to create a dramatic waterfall effect.
All Weather Pools - Wolverine
a 4-inch PVC Tee designed specifically for the high-flow Niagra water feature. This fitting diverts the flow of water, often to create a dramatic waterfall effect.
$--.--
1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
$--.--
1996-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
$--.--
1994-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 90-degree turn in the plumbing.
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 90-degree turn in the plumbing.
$--.--
1994-Current
Arctic/Coyote Models
A "street" elbow has a spigot (SPG) end that glues into a socket fitting and a socket (SLIP) end that glues onto a pipe. This fitting creates a tight 90-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "street" elbow has a spigot (SPG) end that glues into a socket fitting and a socket (SLIP) end that glues onto a pipe. This fitting creates a tight 90-degree turn in the 2-inch diameter plumbing.
$--.--
2012-Current
All Weather Pools - Wolverine
a 90-degree PVC elbow with socket connections on both ends, designed for the spa's 4-inch plumbing.
All Weather Pools - Wolverine
a 90-degree PVC elbow with socket connections on both ends, designed for the spa's 4-inch plumbing.
$--.--
