Showingof 46 item(s)
used to connect two 2-inch components, typically two socket fittings, by acting as a short length of 2-inch pipe.
$--.--
to cap a 2-inch plumbing connection. A "spigot" plug is designed to be glued into a 2-inch slip socket fitting to permanently or temporarily seal it off.
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to four 3/4-inch barbed (BARB) ports for jet lines
$--.--
an internal, spring-loaded replacement component for the filter canister. It is designed to divert water away from the filter element when the filter becomes clogged, preventing excessive pressure buildup and protecting the pump.
$--.--
This wall fitting is used to create a durable, threaded connection point in the hot tub's shell for return lines or other plumbing components.
$--.--
Used as a shut-off valve to isolate different sections of the hot tub's plumbing. This allows for maintenance or repair of components like pumps or heaters without fully draining the tub.
$--.--
is a component used to vent trapped air from the pump's wet end. It has a 3/8" barbed end for connecting to a hose and a 1/4" MPT (male pipe thread) end for screwing into the pump housing.
$--.--
a threaded grate used to cover the ozone or Spa Boy sensor housing on certain models.
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe
Can be replaced with OZZ-300021
Can be replaced with OZZ-300021
$--.--
a threaded grate that is used to protect the 1.5-inch Spa Boy sensor probe in models produced in 2020 and later
Replaces OZZ-3000020
Replaces OZZ-3000020
$--.--
2000-
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
Arctic Models
The valve has a 3/4-inch PVC socket (slip) connection on both ends, allowing it to be glued into the spa's flexible or rigid plumbing.
$--.--
This plug is designed to be used when you are draining your spa to protect the delicate Spa Boy sensor probe from drying out.
$--.--
The plug is used to protect the Onzen/Spa Boy probe when the spa is drained. It screws into the filter bucket housing and keeps the probe wet to prevent it from drying out
$--.--
2012-Current
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
All Weather Pools - Wolverine
a 4-inch PVC pipe specifically for the Niagra high-flow water feature. The pipe is sold by the foot for repairs or installations.
$--.--
1994-Current
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
Arctic/Coyote Models
A "spigot" (spg) fitting is designed to be glued into a socket fitting of the same size. This fitting creates a 90-degree turn in the 2-inch diameter plumbing.
$--.--
1996-Current
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
Arctic/Coyote Models
A "Soc x Soc" (socket by socket) fitting is designed to be glued onto a 2-inch pipe or flexible hose on both ends, creating a 45-degree turn in the plumbing
$--.--
2012-Current
All Weather Pools - Wolverine
a 90-degree PVC elbow with socket connections on both ends, designed for the spa's 4-inch plumbing.
All Weather Pools - Wolverine
a 90-degree PVC elbow with socket connections on both ends, designed for the spa's 4-inch plumbing.
$--.--
a "flow-thru" manifold, meaning it connects two 2-inch components and splits off two smaller 3/4-inch barbed ports for small jet lines or air lines. The "spg" (spigot) connections mean that both 2-inch ends of the manifold are designed to be glued into 2-
$--.--
This flow-thru manifold features two 2-inch spigot (SPG) connections and distributes water to six 3/4-inch barbed (BARB) ports for jet lines. The "spg" connections mean that both 2-inch ends are designed to be glued into 2-inch slip (socket) fittings.
$--.--
2020-Current
This plug is designed to be used when you are draining your spa to protect the delicate Spa Boy sensor probe from drying out. Replaces OZZ-300030
This plug is designed to be used when you are draining your spa to protect the delicate Spa Boy sensor probe from drying out. Replaces OZZ-300030
$--.--
a replacement drain valve assembly used in various Arctic Spas hot tub models, particularly in the Apollo, Coyote, and some Arctic Flex series. It features a specific thread that accepts a garden hose to drain the water from the spa.
$--.--
This wall fitting is used to create a durable, threaded connection point in the hot tub's shell for return lines or other plumbing components.
$--.--
This union connects the main 2 1/2-inch intake plumbing to the pump.
$--.--
1999-2001
Arctic/Coyote Models
a PVC ball valve with 1 1/2-inch socket (slip) connections on both ends, allowing it to be glued into the spa's plumbing to control water flow
Arctic/Coyote Models
a PVC ball valve with 1 1/2-inch socket (slip) connections on both ends, allowing it to be glued into the spa's plumbing to control water flow
$--.--